City, state will team up for new bikeway and signal on Lombard

Latest concept drawing for new crossing of North Lombard at Fenwick/Concord. Note that “access control” likely refers to closing or narrowing driveways of adjacent properties.

The Concord Avenue neighborhood greenway has only one gap in its 2.4 mile route between Overlook Park and North Argyle Street in the Kenton neighborhood: the offset crossing of Lombard Street (a.k.a. Highway 30). But with a new agreement between the Oregon Department of Transportation (they own and manage Lombard) and the Portland Bureau of Transportation, that gap will soon be filled.

The two agencies recently hashed out an intergovernmental agreement (IGA) so that PBOT could do the work to build a new crossing that will link Concord on the south side of Lombard with Fenwick to the north. It’s a much-needed upgrade to an intersection isn’t as safe as it should be. Not only is this a designated neighborhood greenway route, but it’s a popular connector between two neighborhoods (Arbor Lodge and Kenton) and there’s a high school directly adjacent to it.

Streetview looking west on Lombard. Concord is on the left, the half-signal and Fenwick are in the background.

Advertisement

The gap.

The existing crossing infrastructure — known as a pedestrian half-signal — is also not compliant with federal guidelines. A half-signal exists when there’s a standard traffic signal for the major road, but only stop signs for the minor roads. The Manual on Uniform Traffic Control Devices (MUTCD) explicitly prohibits the use of half-signals due to safety concerns. Studies have shown that when someone actuates the traffic signal on the main road, drivers from the side-street think it’s an opportunity to turn and they don’t realize (or they don’t see) the people in the crosswalk. As of 2015, Portland had 47 such signals and because they’re not recommended by the MUTCD, we haven’t installed one since 1986.

PBOT plans to spend $2 million in Transportation System Development Charges to improve this crossing. In addition to the full signal upgrade they plan to add ADA improvements to the curbs and sidewalk, and create a new bike lane on Lombard. As you can see in the latest concept drawing, the plan is to stripe an unprotected, five-feet wide eastbound bike lane and create a westbound bike lane on the sidewalk for the short distance between Concord and the crossing at Fenwick.

As you can see in the cross-sections below, the bike lanes would be separated by a two-foot buffer. The space to add them would come from an existing planted median on the sidewalk and from narrowing one of the existing lanes:

(Graphic: ODOT)

Longtime readers will recall that we first mentioned an improvement at this crossing in 2010.

PBOT Communications Director John Brady said today that with the IGA with ODOT now signed, they can move onto final design work. It will be a few months yet until we get an estimated date of completion. Stay tuned.

— Jonathan Maus: (503) 706-8804, @jonathan_maus on Twitter and jonathan@bikeportland.org

Never miss a story. Sign-up for the daily BP Headlines email.

BikePortland needs your support.

Jonathan Maus (Publisher/Editor)

Jonathan Maus (Publisher/Editor)

Founder of BikePortland (in 2005). Father of three. North Portlander. Basketball lover. Car owner and driver. If you have questions or feedback about this site or my work, feel free to contact me at @jonathan_maus on Twitter, via email at maus.jonathan@gmail.com, or phone/text at 503-706-8804. Also, if you read and appreciate this site, please become a supporter.

Subscribe
Notify of
guest

41 Comments
oldest
newest most voted
Inline Feedbacks
View all comments
maxD
maxD
5 years ago

I lived in Vacouver BC for 4 years (2002-08) and used a bike as my primary transportation and the half-signals were very common on the bike routes. I really loved them. In my experience, they have much better compliance for stopping cross traffic than the Rapid Flashing Beacon or the HAWK signals. They also seem to do a better job at discouraging driving on the bike routes since drivers would not trigger them (they were button-activated which I did not love) and drivers would be forced to wait for bikes and pedestrians and would often not make it through a signal cycle and get stuck awaiting for a long time. I can see how they could appear dangerous, but that was never my personal experience. For this intersection, a full signal seems like overkill, and I am concerned that it would incentivize people driving on Concord; however, I greatly prefer the full signal over the RRFB or HAWK.

Jeff S(egundo)
Jeff S(egundo)
5 years ago
Reply to  maxD

They may not be the ideal design but I use the one on SE Taylor at Chavez (by the library) and at 41st and Hawthorne a lot, and I like them just fine. I also don’t think there’s any significant crash history for the one on Taylor/Chavez..?

soren
soren
5 years ago

“The Manual on Uniform Traffic Control Devices (MUTCD) explicitly prohibits the use of half-signals”

This is incorrect. The MUTCD is not a law, it is a policy manual. Portland has repeatedly chosen to use non-MUTCD compliant traffic control devices. Moreover, the city of Seattle has over 100 half signals and still prefers them over similarly-priced HAWK signal at many locations.

“due to safety concerns.”

Can you please post citations. Moreover, I would argue that the appropriate comparison is between a HAWK signal and a half signal, not with a full signal.

I should also note that a study of Portland’s half signals found that they did not significantly differ from full signals when it came to crosswalk crash rates involving pedestrians:

“Crash rates were 0.158 and 0.178 crashes per million entering vehicles for
3-leg and 4-leg half-signals and these rates did not differ significantly from the minor
street stop controlled and signalized comparison groups.”

https://pdxscholar.library.pdx.edu/cgi/viewcontent.cgi?article=3201&context=open_access_etds

and because they’re not recommended by the MUTCD, we haven’t installed one since 1986.

Yeah…instead we installed many HAWK signals which match the same “risk” with even more risk of non-compliant light running.

Hess Mills
Hess Mills
5 years ago
Reply to  soren

PBOT’s history with non-MUTCD compliant designs is not relevant for this project. It’s an ODOT facility, not PBOT. ODOT is unlikely to design something that doesn’t comply with MUTCD.

Kelly
Kelly
5 years ago
Reply to  Hess Mills

This design violates our most foundational traffic law: drive/ride on the right. Guaranteed people will be riding the wrong way (as intended) down the bike lane because it’s technically the correct side of the cycle path to ride on.

My question is who approves these literally backwards designs?

paikiala
paikiala
5 years ago
Reply to  Hess Mills

States typically adopt the MUTCD with amendments relative to that state. California permits half signals.

John
John
5 years ago

I’m not following the argument behind your comment. Are you saying that PBOT shouldn’t do anything at this intersection?

soren
soren
5 years ago
Reply to  John

My comment was pro-half-signal and did not address the project.
FWIW, I think the proposal is a definite improvement but I’d prefer that the curb be placed in front of the bidirectional bike facility.

John
John
5 years ago
Reply to  soren

The signal would stop traffic though, so I don’t think cars would be next to people biking unless they blew the red light right?

soren
soren
5 years ago
Reply to  John

It takes a while to cross, turn left, and negotiate the half block so there would be cars next to the people occasionally. I don’t understand why putting the curb on the outside was not the automatic choice.

Jeff S(egundo)
Jeff S(egundo)
5 years ago
Reply to  soren

I think because then the 2 way cycle track would have westbound bicyclists next to the curb, without a bike lane buffer, facing and adjacent to oncoming traffic. I would find that very uncomfortable.

eawriste
eawriste
5 years ago
Reply to  Jeff S(egundo)

People on bikes aren’t going to be going fast. There are not a lot of people walking at this intersection. Why not extend the sidewalk another 5′ and make it a MUP? Separation between people on bikes and people walking is necessary only when there is a large speed discrepancy.

Momo
Momo
5 years ago
Reply to  soren

You are probably correct. ODOT likes to maintain a consistent curb-to-curb width on state highways, especially roads like Lombard that are overdimensional freight routes. There shouldn’t be any conflict because of the signal phasing, so it’s not a big deal in my opinion.

David Hampsten
David Hampsten
5 years ago
Reply to  Momo

I think the width has something to do with turning movements of big-rig semis and the radius they need, such as moving trucks going to neighborhoods or grocery semis turning into Safeway.

David Hampsten
David Hampsten
5 years ago

Like every state in the USA, ODOT maintains its own online GIS system, though it’s a bit clunky compared to PBOT’s. https://gis.odot.state.or.us/transgis/

According to ODOT, in 2017 this stretch of roadway had 19,900 vehicles per day on average (AADT). Kinda useful if anyone is thinking that Lombard could use a road diet.

Lombard is US Highway 30, but is also State Highway 123.

footwalker
matchupancakes
5 years ago
Reply to  David Hampsten

This is helpful. Thank you!

footwalker
matchupancakes
5 years ago
Reply to  David Hampsten

Brentwood-Darlington’s name isn’t even on ODOT’s map. “Say my name, ODOT!”

paikiala
paikiala
5 years ago
Reply to  David Hampsten

It’s not daily traffic that indicates a road diet is possible, its peak hour.

David Hampsten
David Hampsten
5 years ago
Reply to  paikiala

Could you elaborate? What are the thresholds for allowing a road diet? What kind of peak AM or PM volume prohibits or inhibits a road diet?

paikiala
paikiala
5 years ago
Reply to  David Hampsten

The rule of thumb is 1,000 vph, though I have seen 1,300 vehicles per hour on Division east of 52nd.
This is the threshold for one lane of traffic. If you have less than this in one direction, that direction does not need more than one lane.

David Hampsten
David Hampsten
5 years ago
Reply to  paikiala

Help me to understand this so I don’t completely screw up on it later. Can I assume that it’s 1,000 vph on both lanes combined, in one direction? That for any street that has over 1,000 vph during any one-hour period, for all days averaged over the year, that a road diet is not a good idea, even if the other 23 hours traffic is considerably less than 1,000 vph? Should special events be considered or ignored in this calculation? (i.e., congestion on I-5 or a nearby event creates an increase in local traffic.) Is there any special consideration for truck/freight traffic (vph)?

eawriste
eawriste
5 years ago
Reply to  David Hampsten

The 4 lane design is inherently dangerous. ODOT knows this. The more important question is not whether there is enough wiggle room in the VPM calculus. It is rather how many people we think should die or be injured by an intrinsically flawed design.

https://streets.mn/2014/10/28/four-lane-death-roads-should-be-illegal/

paikiala
paikiala
5 years ago
Reply to  David Hampsten

1,000-1,300 vehicles per lane per hour is the rule of thumb. It is a first look, as are most rules of thumb, not the end of analysis. So if both lanes going one direction total to 800 vph, then that direction is way over capacity (more space supplied than demand).

Short duration congestion is acceptable most everywhere, LOS D or E for short periods. I suspect that 1,500-1,800 vplph might be the tipping point, but again, modeling can assist with relief strategies, like dedicated turn lanes at the bottlenecks (major intersections).
Trucks, buses, etc., and their effects on the flow can also be modeled.

Few roads are designed for event traffic, hence congestion when events end, and things like reversible lanes, both sides of the centerline going one direction for a limited distance, etc.

mikeybikey
mikeybikey
5 years ago

On the pedestrian half-signal: isn’t the new crossing at NE 26th and NE Broadway exactly this type of signal design where the main road gets a red light but the side streets have only a stop sign? So why is considered ok/safe to install in one place and must be removed somewhere else because it is not compliant?

soren
soren
5 years ago
Reply to  mikeybikey

That’s a HAWK signal which has a “triangle” of three lights that change from flashing yellow, to solid red, and flashing red.

paikiala
paikiala
5 years ago
Reply to  mikeybikey

Pedestrian Hybrid Beacons are permitted in the MUTCD. It says they should not be placed at intersections, not ‘shall not’.

Kelly
Kelly
5 years ago

lol cyclists getting a left-hand lane like it’s England or something

Chris I
Chris I
5 years ago
Reply to  Kelly

Just greet opposing cyclists with a friendly “Cheerio” and be on your way.

Sam
Sam
5 years ago

This really just formalizes what people have been doing at this intersection for years.

paikiala
paikiala
5 years ago
Reply to  Sam

The 2-foot buffer was between the westbound bikes and car lane in the original proposal.

Bald One
Bald One
5 years ago

Seems like a reasonable way to deal with this spot. I’m glad to see they are actually crushing concrete (and not just splashing paint) in this project – it shows commitment, although I suspect that might all be for the ADA portion of this project.

I wonder if there were any significant street trees currently in the planting section they plan to pave over if they would use this design or scuttle the whole westbound raised-bike lane part of this project and just mix the two bike lane directions together on the street.

Issue with bike lanes on Lombard is that people tend to park their cars in them.

Scott F Kocher
5 years ago

Isn’t there another (highly valuable) three to five feet available to work with here?

“Lane widths of 10 feet are appropriate in urban areas and have a positive impact on a street’s safety without impacting traffic operations. For designated truck or transit routes, one travel lane of 11 feet may be used in each direction.” – NACTO
https://nacto.org/publication/urban-street-design-guide/street-design-elements/lane-width/

paikiala
paikiala
5 years ago
Reply to  Scott F Kocher

The original proposal shifted the car lanes and used an 11/10/10/11 auto lane cross section to maximize south side space for the jog.

paikiala
paikiala
5 years ago

Side street access management means something similar to 33rd and Going, with car entry prohibition except for bikes. Not that feasible on the north side with the school.

David Hampsten
David Hampsten
5 years ago
Reply to  paikiala

Do you mean that east-bound school buses need to be able to turn north onto Fenwick? And west-bound school buses need to turn left from Fenwick onto Lombard?

paikiala
paikiala
5 years ago
Reply to  David Hampsten

Its a private school renting PPS facility (Seton?). It’s a traffic issue, no school busses. The two streets that back the school are residential streets, so blocking the one next to the school only pushes that traffic to another residential street. The Russet Street on the north side is blocked at Interstate by the light rail lines. The first E-W street north of the school with a signal on Interstate is the Terry greenway.

mark smith
mark smith
5 years ago

A 5 foot bike striped lane next to to two 11 Foot lanes is quite nuts. The next gem in this sea of excitement is the 12 foot lane on the opposite side. Vehicles by law are a max of of 8.5 feet wide. So, why does it need to be 12? All this will do is encourage CMV’s to race eachother in that right lane. Lombard should be a max of 10 feet from I-5 to the bridge. But…that would just be good for people right?

this put’s CMV’s right next to bikes, at high speeds. Who will die first?

JJJ
5 years ago

AFAIK, half signals are “discouraged” which is very different from “prohibited”

Skid
Skid
5 years ago

Please, no bikeways that make it appear that you are riding against traffic on the sidewalk.