Order Rev Nat's Cider Today

Promised over a decade ago, Portland embarks on NW Flanders Bikeway project

Posted by on October 3rd, 2018 at 2:26 pm

PBOT Project Manager Scott Cohen at the kickoff planning meeting September 20th.
(Photos: Reza Farhoodi)

Making good on a promise made over a decade ago, the City of Portland has finally started planning a new bikeway on NW Flanders between Waterfront Park and 24th. And at a meeting late last month, Portlanders got their first chance to see it.

The origin of the project goes back to the 2005 Burnside/Couch Transportation and Urban Design Plan. As the legend goes, bike advocates cut a deal with the Bureau of Transportation: Couch was originally designated as the major east-west bikeway through this part of town; but PBOT wanted it to be the couplet with Burnside, so the agreement was to switch the bikeway a few blocks north to Flanders.

The plan was adopted. The couplet was never completed and the Flanders bikeway was all but forgotten.

Here’s a graphic of the bikeway from the Bicycle Improvements chapter of the Burnside/Couch Transportation and Urban Design Plan:

(City of Portland)

Now, with the construction of the Flanders Crossing bridge over I-405 imminent, the city is finally making good on their promise. According to PBOT, they have $2.4 million to spend thanks to System Development Charges. The goal is to create a “low-stress bikeway” that will encourage more people to ride bikes and to, “Provide people of all ages and abilities a safe, comfortable place to bike in the Central City.”

PBOT has already built around 80 miles of neighborhood greenways, but those are in residential areas. The Flanders bikeway would be a different animal since it would have a more dense and urban context.

Pearl District Neighborhood Association member and safe streets advocate Reza Farhoodi was at the project’s kickoff meeting last month. He said he was “impressed” with the initial proposals — especially in Old Town and the Pearl. Farhoodi shared an image of PBOT’s project map that lists existing auto traffic volumes and traffic diverters proposed along the route. The map (below) shows that PBOT wants to implement significant measures to reduce the number of people who drive on Flanders.

Advertisement

The map shown at the meeting.

PBOT’s greenway design mandate (as adopted by City Council with the 2015 Neighborhood Greenways Assessment Report) is to get the number of people driving cars to about 1,000 per day. As you can see on the map, the average daily traffic (ADT) on Flanders today is way above that. To discourage driving on Flanders they’ve proposed alternating one-way sections and two full driving closures: one at the North Park Blocks and one just east of 17th.

“The full closure at Park Blocks would be a wonderful placemaking opportunity at the intersection of the Green Loop.”
— Reza Farhoodi, Pearl District Neighborhood Association

“The full closure at Park Blocks would be a wonderful placemaking opportunity at the intersection of the Green Loop,” Farhoodi shared with us via email. “And I think the alternating one-ways is a potential solution for designing future neighborhood greenways in Central City and Northwest where there is a lot of pedestrian activity and high-density development.”

One sticking point that remains is the crossing of Naito just south of the Union Pacific Railroad tracks at the Steel Bridge. PBOT has spent years negotiating with UPRR to make a crossing at this location and now they have a design and the funding to make it happen. But PBOT Project Manager Scott Cohen made it clear at the meeting last month that UPRR is still not satisfied and there are interim plans to jog the route to NW Davis to get across Naito until a final plan for a crossing at Flanders can be ironed out.

If the Flanders Bikeway is built (construction estimated for fall/winter 2019), Farhoodi says having to use Davis to cross Naito, “Would certainly be sub-optimal.” “I consider the crossing to be the key component into making this a regional bike facility, and it would be absurd to spend millions elsewhere upgrading Flanders without completing this critical connection.”

We’ll be watching that part of the project closely. Expect more public outreach in the coming weeks and months. PBOT expects to have a final design completed by next spring.

Correction, 10/9: This post originally said that the West Burnside/Couch couplet was built. That was a mistake. The couplet was never built (it was on the east side, however).

— Jonathan Maus: (503) 706-8804, @jonathan_maus on Twitter and jonathan@bikeportland.org

Never miss a story. Sign-up for the daily BP Headlines email.

BikePortland needs your support.

NOTE: We love your comments and work hard to ensure they are productive, considerate, and welcoming of all perspectives. Disagreements are encouraged, but only if done with tact and respect. If you see a mean or inappropriate comment, please contact us and we'll take a look at it right away. Also, if you comment frequently, please consider holding your thoughts so that others can step forward. Thank you — Jonathan

33
Leave a Reply

avatar
11 Comment threads
22 Thread replies
0 Followers
 
Most reacted comment
Hottest comment thread
22 Comment authors
Stephen KellermatchupancakesTerry D-MmaccoinnichGary B Recent comment authors
  Subscribe  
newest oldest most voted
Notify of
Jim Lee
Guest
Jim Lee

Any designs for the 405 bridge yet?

paikiala
Guest
paikiala

Where is this NW Burnside-Couch couplet you speak of?

John Liu
Guest
John Liu

I guess that ship sailed. Too bad, I think a couplet would be great. Imagine Burnside with the wide tree-lined sidewalks that eliminating one direction of traffic would permit. We could have our own Las Ramblas.

Todd Boulanger
Guest
Todd Boulanger

True, great placemaking opportunity for Burnside…but at what cost as I worry about Couch taking on more traffic to become more like today’s Burnside. (Borrowing from Vietnam, ‘we had to destroy the placemaking of Couch to save it’.) This is one project I have not been too sad to see stall at least until local leaders become truely serious about vision zero and ending subsidized SOV trips…

Let's Active
Guest
Let's Active

Totally agree with Reza about the Flanders vs Davis crossing. If it ends up being Davis, it’s going to really be sub-par as a corridor through to the Steel Bridge. The jogging to the south to Davis is already a pain. I’ve got my fingers crossed that the railroad will be collaborative, but I’m not exactly hopeful. If it does pan out, this is a fantastic project.

emerson
Subscriber

Placing the bikeway on Flanders is more elegant than Burnside or Couch.

One of my big hopes is PBOT does away with stop signs every-other block on key bikeways. Riding up or down Johnson is a joke, and that kind of placement on a “key” bikeway just invites people to break the rules.

Dan A
Subscriber
Dan A

I agree, I hate having so many stop signs on my greenway, except…….the stop signs discourage drivers from using Johnson, and they make it more difficult for drivers to get their speeds up.

Dan A
Subscriber
Dan A

I mean, the real solution would be car-free routes. The halfway solution is a janky road in disrepair with faded sharrows and lots of stop signs. I still prefer the halfway solution to riding on Glisan.

paikiala
Guest
paikiala

like they have at every neighborhood greenway/legacy upgrade?

maccoinnich
Subscriber

PBOT hasn’t yet done any upgrades to neighborhood greenways in dense urban areas like Old Town / the Pearl / Northwest. Almost every street that intersects Flanders has an equal or higher design classification, so the strategy that works well in the suburban style neighborhoods probably won’t work on Flanders (i.e. there’s no chance that PBOT is going to flip the stop signs at 10th and 11th where the streetcar crosses Flanders).

One strategy that could be used at un-signalized intersections is to require users to yield but not stop. We don’t seem to do that much in Portland, but that’s standard practice in Europe.

matchupancakes
Guest
matchupancakes

SE 71st Ave as it approaches SE Tolman Greenway from both north and south directions features Yield signs. It is such a rare design choice here that I do a double-take everytime I pass by.

Gary B
Guest
Gary B

I’m not clear on the Naito crossing. Why does that require UPRR? I know that the crossing project included improvements to the tracks crossing (moving the Willamette Greenway crossing), but it seems like that could be delayed while proceeding with the Naito crossing.

Let's Active
Guest
Let's Active

Gary, I think it’s because the bike signal needs to be coordinated with the at-grade rail crossing. They would need to communicate with each other. If the bike signal stopped auto traffic, the rail line would not want autos stacked across the tracks for safety reasons. My guess is that this makes things more complicated for the rail line and, consequently, makes rail less interested in making modifications to its system.

Gary B
Guest
Gary B

Thanks, interesting point. I still can’t see why that requires “negotiation” with UPRR. That sounds like a UPRR problem. They don’t have control over the signal out of their ROW, so I would think PBOT would just send them notice: “hey, there’s going to be this new signal a block from your tracks, so you may want to do something at your crossing.”

Momo
Guest
Momo

That’s not how it works. Just as ODOT has an “influence area” around interchanges where they have veto power, UPRR has an influence area around railroad crossings. Also the railroads are widely recognized to have more power than local governments in many ways, since they existed first and were granted their right-of-way by the federal government.

maxD
Guest
maxD

I hope they address the cut-through traffic from people coming off 405 southbound and go Flanders-18th-Glisan. That is an illegal move, drivers ar supposed to drive Everett-15th-Glisan, but it is not enforced, and the light at 15th/Glisan is a long red and a short green. Anyway, that kind of cut-through traffic can ruin a greenway.

Gary B
Guest
Gary B

Why is it illegal? I see people turn directly on Glisan from the 405 offramp, which is illegal (requires turning across multiple lanes). But you can legally get over and turn on Flanders, I think. I recognize there’s a sign telling directing drivers to use the Everett loop, but that’s just an advisory sign. I agree it should be addressed for the Greenway (or sooner).

maxD
Guest
maxD

It is illegal because it requires crossing multiple lanes within a block.

Gary B
Guest
Gary B

[Citation needed]

AnotherEngineerPDX
Guest
AnotherEngineerPDX

It would be great if the bike lane on 2nd was extended between Everett and Flanders, Biketown could move to the other side of the street and take a few parking spots.

sikoler
Guest
sikoler

Yes Greenways are the answer, separate from commuter traffic, don’t mix bikes with commuters.

Chris I
Guest
Chris I

Can bikes be commuters?

ereillypdx
Guest
ereillypdx

The current lack of an clear, safe link between the Steel Bridge and Old Town is a real problem for the downtown bike infrastructure. Trying to cross Naito near the railroad tracks is a dangerous exercise in curb hopping, traffic dodging, and going the wrong way on one-way streets. The Flanders crossing is key to linking the east and west sides of the river.

Jimmy
Guest
Jimmy

So what happens to Everett right next door? 2 Bikeways?

Momo
Guest
Momo

Sure, two bikeways, why not? One has a green wave with the signals, the other one is quiet and comfortable. Different strokes for different folks.

matchupancakes
Guest
matchupancakes

Flanders is designed for all ages and abilities and will likely have a moderate pace. Everett is not: I would not let me eight year old nephew ride there. It is best for fast cycling commuters.

Stephen Keller
Guest
Stephen Keller

Flanders will be frustrating if crossings at busy streets are left to chance. I used to ride down Jefferson from 25th to the Steel Bridge before Everett was striped. Getting across 23rd, 21st and 14th were significant tests of patience.

Andrew Kreps
Guest
Andrew Kreps

Yeah, I guess I’m doomed to ride over the center divider and go the wrong way up Glisan even after this is built. I’m understandably disappointed that the most important connector isn’t on the table, but I’m glad the rest of it is being built.