A very rare pair of bikes for Mr. Horton

NAHBS 2011- The Horton Pair-20

It all started with two old chainguards.
(Photos © J. Maus)

Brett Horton is one of the most well-known collectors of vintage bicycles and racing ephemera in the world. For the past 25 years he has amassed a unequaled collection of 15,000 objects and 20,000 photographs.

So, what happens when the owner of The Horton Collection wants a personal bike for him and his (equally bike-obsessed) wife Shelly? Today, NAHBS goers, and now the world, found out.

His.
Chris Bishop

Mr. Horton’s bike was made by Chris Bishop.

Hers.
Stephen Bilenky

Ms. Horton’s bike was made by Stephen Bilenky and his crew.

About a year ago Horton approached two builders whose work is as impressive as his collection: Stephen Bilenky of Bilenky Cycle Works and Chris Bishop of Bishop Bikes. The result of their collaboration are a pair of custom “constructeur” bicycles that have become the most talked about bikes of the show. Almost every part has been custom fabricated specifically for this project.

NAHBS 2011- The Horton Pair-28

NAHBS 2011- The Horton Pair-21

I talked with both Bilenky and Bishop about the bikes. I can tell the many variables and the timeline made this project both technically difficult and mentally draining (“stressful” is how Bishop described it). “He [Horton] approached me last year,” recalled Bilenky, who made Shelly’s bike, “It seemed like an innocent at the time, like any other project.”

NAHBS 2011- The Horton Pair-24

NAHBS 2011- The Horton Pair-1-2

NAHBS 2011- The Horton Pair-32

Bishop, who made Brett’s bike, says the project was “stressful” but that he’s excited about how the bike turned out. “I put in two, 100-hour work weeks at one point,” he said. “It’s the little things that get you on a project like this.” Part of the huge time commitment for Bishop was a stunning, hand-forged aluminum stem. Inspired by legendary French constructeur Rene Herse, Bishop started with a single block of aluminum and then milled it out by hand to give it a rounded, finished look that’s rare for aluminum.

NAHBS 2011- The Horton Pair-35

NAHBS 2011- The Horton Pair-31

NAHBS 2011- The Horton Pair-30

NAHBS 2011- The Horton Pair-26

Other custom touches on the Brett Horton bike include a Brooks saddle with spiral-wrapped steel springs and “Horton” laser cut into the pedals. The Shelly Horton features custom panniers made by Laplander Bags from Philadelphia. Both bikes feature a custom-drawn tubeset from Columbus, wooden rims, and exquisite paint schemes.

One of the most eye-popping features on both bikes are the custom Phil Wood hubshells that wrap a Rohloff hub in the rear and a dynamo front hub.

NAHBS 2011- The Horton Pair-27

NAHBS 2011- The Horton Pair-25

NAHBS 2011- The Horton Pair-36

NAHBS 2011- The Horton Pair-44

When describing his bike, Bilenky, a builder known for meticulous details and artistic flair, used the word elegant. “I got the idea for the lug designs off an art deco train station door.”

Both men started with the vintage, 1930s chainguards that Horton brought to the project. Those chainguards sparked the aesthetic direction of the bikes. Whether the end result is your style or not, I hope we can all appreciate the technical prowess, aesthetic vision, and collaborative spirit that went into this project.

NAHBS 2011- The Horton Pair-41

NAHBS 2011- The Horton Pair-38

NAHBS 2011- The Horton Pair-37

Stay tuned for more coverage of the 2011 NAHBS from Austin. See our latest images here.

Jonathan Maus (Publisher/Editor)

Jonathan Maus (Publisher/Editor)

Founder of BikePortland (in 2005). Father of three. North Portlander. Basketball lover. Car owner and driver. If you have questions or feedback about this site or my work, feel free to contact me at @jonathan_maus on Twitter, via email at maus.jonathan@gmail.com, or phone/text at 503-706-8804. Also, if you read and appreciate this site, please become a supporter.

Subscribe
Notify of
guest

24 Comments
oldest
newest most voted
Inline Feedbacks
View all comments
Sel
Sel
13 years ago

I would give my first born for the Shelley Horton. No lie. It is absolutely gorgeous.

joel
13 years ago

great to see pics of these – ive been hearing about them from brett since before builders were chosen, and its been a pretty insane project. both builders, and all the other manufacturers involved, have done utterly amazing work on these – and rest assured, people, theyre going to get ridden 🙂

Douglas
Douglas
13 years ago

Beautiful bikes…I believe the Brooks saddle on the Brett Horton is a B33. Ornate stranded coil springs, triple rails and a front loop, but a standard model: http://www.brooksengland.com/en/Shop_ProductPage.aspx?cat=saddles+-+city+%26+heavy+duty&prod=B33

bob k.
bob k.
13 years ago
Reply to  Douglas

it was actually a modified b33 with non-standard hammered copper rivets

Brett Horton
13 years ago
Reply to  Douglas

Hi Douglas,

You possess a very impressive knowledge of the Brooks line. While not clearly visible in the photos, the saddle is in fact stamped B33. While I liked the basic design of the standard B33, I asked Brooks to execute the following:

hand selected hide –
smooth finish rather than textured normally found on a B33. A smooth finish generally demands a high quality hide because any blemishes are very easy to spot.

hand skived stripe along the side edges of the saddle –
(standard saddle does not incorporate this feature)

no bag loops –
(loops are standard on the B33)

hand hammered copper rivets –
(smaller chrome rivets are standard on the B33)

The saddles on Shelly’s bike had similar modifications and also include saddle laces.

The saddles arrived to me only a few days before the show. Still to be done is modifications to the saddle frame fasteners and the addition of a very elegant seat post mount specially fabricated by Phil Wood to accommodate the triple rails of the B33.

I’m guessing some of the other folks do not understand the functional rationale of using a modified saddle rather than one that is fully custom. Custom leather bodied “show” saddles look wonderful. However, the unfortunate reality is after 400-500 miles of actual use the shape of most “show” saddles is lost. To properly hold shape, the saddles need to be blocked and that requires very specific tooling.

Neither of these bikes are wall queens. The only “wall queens” I own are those that have actual historical racing significance. Even then, there is not a single one of them that is NOS or even close. All of them were the actual bikes ridden to victory by such unknown, minor riders as Freddy Maertens, Lance Armstrong, Mario Cipollini, Greg LeMond, Jean Alavoine, Rik Van Steenbergen, Bernard Hinault, and others.

Every bike I have ever owned that is not of historical race significance (ie including these two town bikes) is ultimately rode into the ground. From my perspective, an unridden bike has no soul!

Warm regards,
Brett Horton

Paul Hanrahan
Paul Hanrahan
13 years ago

Horton hears a who? Nice bikes!

CaptainKarma
CaptainKarma
13 years ago
Reply to  Paul Hanrahan

I was gonna say that, but oh well.

dp
dp
13 years ago

Wow. Incredible details!

Jim Lee
Jim Lee
13 years ago

I do not know what to think.

Wretched excess?

Profoundly ugly?

Edsel cycles?

All details, no design?

As least Jay Leno admits he has more money than brains.

Sarcasm, much, but I cannot stand such worthless rubbish.

CaptainKarma
CaptainKarma
13 years ago
Reply to  Jim Lee

This is ‘merica, where everything is taken to extremes.

joel
13 years ago
Reply to  Jim Lee

to each their own, i suppose. for me, as far as no-holds-barred nahbs showstoppers, the two bikes the hortons had built, while absolutely chock-full of one-off parts, blow the doors off some of the other blinged-out nahbs bikes ive seen over the years in terms of usability and practicality.

they may not be to your taste, but worthless rubbish they are not. the project grew from a fairly simple one when conceived, and snowballed as the companies involved in supplying componentry jumped in enthusiastically, desirous of making one-off parts for this special project. the sheer amount of not-your-ordinary custom work on these is mind-boggling, and not entirely due to bretts desire for a unique pair of bikes.

wsbob
wsbob
13 years ago
Reply to  Jim Lee

“…Profoundly ugly? …” Jim Lee

Be specific: what do you think is ugly about those bikes.

The basic design of each bike is tried and true traditional, both the diamond frame of the men’s bike and the mixte frame. That particular mixte frame variant with its slightly swoopy and recurved top tubes was apparently very popular across the pond in past decades and produced in great numbers.

Classic and vintage bike enthusiasts love that style bike frame, and the sculpted chainguard. Seeing more bikes like that on the street seems like a good thing to me.

Harald
Harald
13 years ago

Nice bike. What’s the point of the hub generator when you don’t have lights? Oh well, these probably won’t be ridden much anyway. Bikes belong on the roads, not in museums.

Adams Carroll (News Intern)
Reply to  Harald

Harald, I failed to mention it in the article, but these bikes are not yet complete. There are still several details that were not done in time for the show… one of which are the lights. Thanks.

Harald
Harald
13 years ago

I see. That makes more sense. I’m sure an Edelux would look nice on those bikes.

joel
13 years ago
Reply to  Harald

the guts would be nice, but aesthetically you may as well ziptie a flashlight to the handlebars. lights are on the way, trust me.

Greg
Greg
13 years ago
Reply to  joel

While you may enjoy the technical excess, from the pics, the “his” bike is already aesthetically ugly. The colors clash, the textures clash, it’s just a big jumbled mess.

bob k.
bob k.
13 years ago
Reply to  Harald

they are getting supernova head and taillights with custom machined housings from phil wood

joel
13 years ago
Reply to  Harald

i know for an absolute fact that these bikes will be ridden. there are bikes in bretts collection that dont get ridden – but the ones that hes had built for him are not they.

Alexis
Alexis
13 years ago

Beautiful photos of beautifully-made bikes! Can’t say I love the look myself, but they are obviously lovingly crafted and I admire that about them.

TheCowabungaDude
13 years ago

Those are two of the most beautiful bikes. Congratulations to the Hortons and to the builders. Wow.

kww
kww
13 years ago

Are those Ghisallo wood rims? Yes! More here:
http://wheelfanatyk.blogspot.com/2011/02/upcoming-2011-handbuilt.html

ps to the haters, you sound jealous

craig
craig
13 years ago

That beautiful bi-plane fork crown echoes the 1982 mtb crown design that Tom Ritchey pioneered, that were revived one-time only by Ritchey in 1993 for top-end Bridgestone road and mountain bikes. Real works of sculptural beauty.

http://prollyisnotprobably.com/2010/02/tom_ritchey_unicrown_fork_pion.php

beth h
13 years ago

The Hortons and their constructeur-collaborators have just set the bar for the objectification-of-bicycles-as-sex-objects impossibly high. Any bike maker will be hard pressed to come close to the INSANE beauty of these two bikes.
Zowie.
Get me my lobster bib.