Hazmat situation on Springwater raises air quality concerns (again)

For the second time since November of last year, people who bike on the Springwater Corridor (in blue) have raised concerns about emissions from nearby factories.

At just after 5:30 pm yesterday evening a toxic cloud of chemicals formed above a factory in Southeast Portland just yards away from the popular Springwater Corridor bikeway.

“… Once I got home and heard there was a chemical leak and a toxic cloud forming, I was pretty frustrated that they let us bikers ride through without warning.”
— Tina Osterink

The incident occurred at Precision Castparts on the 5000 block of SE Johnson Creek Blvd just east of Harney. According to The Oregonian, the cloud was a mix of hydrochloric and nitric acid that caused respiratory injuries for two firefighters. Authorities called for a residential evacuation near the factory and closed SE Johnson Creek Blvd.

But according to Sellwood resident Tina Osterink, there was no warning of the threat or official closure of the Springwater Corridor. Osterink wrote us to share her experience:

“My coworker and I were biking home to Sellwood from Gresham yesterday when we noticed fire trucks arriving at the Precision Castparts plant on Johnson Creek Blvd. The firemen were turning cars around along the street yet they did not think to alert us bike commuters, which once I got home and heard there was a chemical leak and a toxic cloud forming, I was pretty frustrated that they let us bikers ride through without warning.”

Osterink says she woke up with lung irritation this morning and is worried that she might have been exposed to harmful airborne chemicals.

“Actually,” Osterink says, “I’ve always wondered about biking next to that industrial area and if they should be monitored more to protect people walking and biking along that stretch.”

And she’s not the only one.

After news broke of this toxic cloud last night, I recalled our story back in November about residents’ concerns of emissions from plastics manufacturer McClure Industries. Residents near that factory say McClure is releasing too much styrene into the air.

Both of these incidents raise the issue of whether or not the Oregon Department of Environmental Quality (DEQ) and other regional agencies should begin to recognize the Springwater facility as a transportation corridor and adjust their policies and response protocols accordingly.

Jonathan Maus (Publisher/Editor)

Jonathan Maus (Publisher/Editor)

Founder of BikePortland (in 2005). Father of three. North Portlander. Basketball lover. Car owner and driver. If you have questions or feedback about this site or my work, feel free to contact me at @jonathan_maus on Twitter, via email at maus.jonathan@gmail.com, or phone/text at 503-706-8804. Also, if you read and appreciate this site, please become a supporter.

Subscribe
Notify of
guest

23 Comments
oldest
newest most voted
Inline Feedbacks
View all comments
david
david
12 years ago

Surely, air monitering devices could be mounted in active industrial areas, not just for bicyclists, but for residents as well. Bicyclists are not the only users of Springwater.

q`Tzal
q`Tzal
12 years ago
Reply to  david

And industries that are emitting, or have the potential to emit, toxins in a urban, suburban or rediential environment should be paying out of their own pockets for alarmed sensors that will scream loudly while alerting government authorities.

Mark Markovich
12 years ago

And just down the road from my house. Awesome.

G. Tyler
G. Tyler
12 years ago

Just missed it on the way home last night, but thanks to a friend, was ready for the unmarked detour this morning.

A.K.
A.K.
12 years ago

Any idea if the air quality has improved today? I was going to link my ride tonight up to that portion of the Springwater, out to I-205.

Chris I
Chris I
12 years ago
Reply to  A.K.

Atmospheric conditions yesterday (heavy low clouds) were preventing the gasses from dissipating. Given the weather today, I would imagine there is no risk now. The leak was stopped yesterday.

rootbeerguy
rootbeerguy
12 years ago

the company uses radioactive materials as well as other hazardous materials to make molds for parts. i applied for a job handling radioactive wastes there. i never got that job. i think it is a good thing.

was carless
was carless
12 years ago
Reply to  rootbeerguy

Wait. What kind of radioactive materials? Low level wastes?

Seth
Seth
12 years ago

smelled it yesterday evening right when I got home from my ride with my 2 year old son.

Spiffy
Spiffy
12 years ago
Reply to  Seth

guess just to be safe I’ll avoid it on the way home this evening with my 2 year old son… (:

thought about making a detour to the waterfront, but maybe we’ll just stick with our usual route…

Dabby
Dabby
12 years ago

Oh the irony, as many bicycles have been produced as a result of tubes made right there…… Can you say Specialized?

Oh, no, you can’t, throat is irritated… Sorry

JDL
JDL
12 years ago
Reply to  Dabby

Does Precision Castparts really produce metal tubes used in Specialized frames?

Psyfalcon
Psyfalcon
12 years ago
Reply to  JDL

No. They mainly do do aerospace and medical. I can’t find anything about making tubes.

Dabby
Dabby
12 years ago
Reply to  Psyfalcon

They used to is what I was meaning… sorry..

marshmallow
marshmallow
12 years ago

Just ride faster and hold our breath. Gosh.

Steve
Steve
12 years ago

Interesting news since this is along my regular commute, however, yesterday I took Max. I regularly smell something that smells like epoxy resin when I ride by the McLure building (the building that looks like a big blue shed). I get a very similar smell from a building along the 205 path. I think the building is just south of the Fuller Rd. Max stop.

craig
craig
12 years ago
Reply to  Steve

I’m by no means a regular user out there, but in four years and probably two-dozen trips along the Springwater in that segment, I have always–every single time–smelled a industrial chemical odor that made me wish I could hold my breath for five minutes while passing through.

Event or no, the air quality along that stretch of the trail is unfit for the living, let alone the deeply breathing pedaling set.

rootbeerguy
rootbeerguy
12 years ago

Steve
…..smells like epoxy resin……….

i love that smell… :X

rider
rider
12 years ago

Here’s the link to send an email to Portland’s Emergency Management Office. http://www.portlandonline.com/oem/index.cfm?c=53978

If we let them know about this issue then next time they will close the trail as well.

K'Tesh
K'Tesh
12 years ago

Thanks for the heads up… now if only the EPA will pay attention.

Dan
Dan
12 years ago

Actually, I believe it was hydrofluoric acid, not hydrochloric. Even worse.

Jon
Jon
12 years ago

For bicycle tubing you are thinking of sapa, the aluminum extrusion company. PCC makes jetliner parts – typically large investment cast parts used in modern jet engines.
I suspect that the typical cyclist is exposed to far more dangerous pollution every time a diesel truck, bus or automobile passes them – think cancer causing particulates.

Chris
Chris
12 years ago

I’m more concerned about the massive amount of broken glass allover the springwater. I should start keeping a tally of busted OE bottles.